Roofing Systems

We have a variety of Conklin Roofing Systems available. 
Click below to explore the options.

Call us today for your free estimate

Contact us today to see what we can do for you

Cool roofs are designed with you in mind

Enter your text here...

A cool roof is one that has been designed to reflect more sunlight and absorb less heat than a standard roof. Cool roofs can be made of a highly reflective type of paint, a sheet covering, or highly reflective tiles or shingles. Nearly any type of building can benefit from a cool roof, but consider the climate and other factors before deciding to install one.

Just as wearing light-colored clothing can help keep you cool on a sunny day, cool roofs material that is designed to reflect more sunlight and absorb less heat than a standard roof. Cool roofs can be made of a highly reflective type of paint, a sheet covering, or highly reflective tiles or shingles. Standard or dark roofs can reach temperatures of 150°F or more in the summer sun. A cool roof under the same conditions could stay more than 50°F cooler and save energy and money by using less air conditioning.

Enter your text here...

Benefits of cool roofs

A cool roof can benefit a building and its occupants by:

  • Reducing energy bills by decreasing air conditioning needs
  • Improving indoor comfort for spaces that are not air conditioned, such as garages or covered patios
  • Decreasing roof temperature, which may extend roof service life.

Beyond the building itself, cool roofs can also benefit the environment, especially when many buildings in a community have them. Cool roofs can:

  • Reduce local air temperatures (sometimes referred to as the urban heat island effect)
  • Lower peak electricity demand, which can help prevent power outages
  • Reduce power plant emissions, including carbon dioxide, sulfur dioxide, nitrous oxides, and mercury, by reducing cooling energy use in buildings.

Low sloped roofing

Single-ply membranes are pre-fabricated sheets rolled onto the roof and attached with mechanical fasteners, adhered with chemical adhesives, or held in place with ballast (gravel, stones, or pavers).
How they can be made cool: Reformulate or coat black membranes to make them reflective.

Fabric Built-up roofs consist of a base sheet, fabric reinforcement layers, and (usually) a dark protective surface layer.

How they can be made cool: The surface layer can be made different ways, and each has cool options:

1.) Substitute reflective marble chips or gray slag for dark gravel in a flood coat of asphalt

2.) Use reflective mineral granules or a factory-applied coating rather than a dark coating on a mineral surfaced sheet

3.) Apply a cool coating directly on top of a dark asphaltic emulsion coating.

Modified bitumen sheet membranes have one or more layers of plastic or rubber material with reinforcing fabrics, and are surfaced with mineral granules or a smooth finish. These can also be used to surface a built-up roof—known as a "hybrid" roof.

How they can be made cool: Pre-coat with a cool roof coating at the factory.

Spray polyurethane foam roofs are constructed by mixing two liquid chemicals together that react and expand to form one solid piece that adheres to the roof. Foams are highly susceptible to mechanical, moisture, and UV damage, and rely on a protective coating.
How they can be made cool: The protective coatings are usually already reflective, and offer cool roof performance.

Metal roofs are available with natural metallic finishes, oven-baked paint finishes, or granular coated surfaces.

How they can be made cool: Unpainted metals are typically good solar reflectors but poor thermal emitters, so they rarely satisfy low slope cool roof requirements. Painting a metal roof can increase its solar reflectance and thermal emittance, allowing it to achieve cool roof status. Alternatively, you can apply cool reflective coatings.

Overview of our industry leading roofing systems

Contact Us today!